Panasonic

Supported models

The following models are supported:

Panasonic phone provisioning requires version 63.1 or higher.

The following features are supported:

LAN provisioning: Phone in the LAN can be provisioned through the web interface of the PBX. However because by default the phones don't have their web server enabled, this requires a manual enabling of the web server. Re-provisioning the phones from the PBX works.
Buttons: The PBX can provision the buttons of the phones. BLF modes and speed dial is supported, other modes are not available.
Transport layer: TCP and UDP are supported; TLS requires the provisioning of the certificate which is not done automatically but possible.
Localization: Most of the time zones should be working fine. Currently only English language is provisioned on the phone, but of course the IVR can be any language.
Basic features: Basic features like making calls, message waiting indication are working fine.

If you want to set he devices up manually for provisioning, please follow the following steps:

Make sure that you can log into the web server of the device. This must be done through the phone user interface (keyboard). Then go into the web interface.
Set the provisioning file to https://ip-pbx /prov/model .cfg, where model can be KX-UTG200B, KX-UTG300B, KX-UT123, KX-UT133, KX-UT136, KX-UT1363, KX-UT248 or KX-UT670.
Make sure that the device does not verify the certificate of the PBX (unless it is something that the phone would accept).
Add the MAC to the extension and make sure that the pairing of new devices in the extension is enabled.