Skip to main content

Deutsche Telekom CompanyFlex – SIP Trunk Setup

1. Login to the Telekom BSP Portal​

Open the Deutsche Telekom BSP Portal:
https://bsp.geschaeftskunden.telekom.de/portal/login.xhtml

  1. Log in with your credentials.
  2. Wait for the confirmation code via email.
  3. Enter the confirmation code in the portal.

2. Create a SIP Trunk in the Telekom Account​

  1. Navigate in the account to:
    Action → Configure CompanyFlex
  2. Create a new SIP trunk.
  3. Assign the desired phone numbers (DIDs) to the trunk.

Notes

  • Multiple SIP trunks can be created.
  • The overview shows all created trunks with their assigned phone numbers.
  • Individual trunks can be opened via right-click → Edit / Configure Details.
  • The login credentials for PBX setup are also displayed there.

3. Set Up the SIP Trunk in the PBX​

Navigate in the PBX to: Tenant → SIP Trunks (V69 VoIP Provider) → Add

  1. Select the Deutsche Telekom Company Flex template from the provider list.
  2. The fields are pre-filled with suggestions matching the format of the login credentials stored in the BSP Portal.
  3. Enter the credentials shown in the BSP account if needed.

If all details are correct, the trunk will connect to the Deutsche Telekom server immediately.

4. Check or Create a Dial Plan​

https://doc.vodia.com/docs/regex-dialplan

5. Inbound Routing​

https://doc.vodia.com/docs/trunk-inbound-routing

Recommendation: When using number blocks, it is recommended to configure extensions so that the last digits of the DID match the extension numbers.

6. Summary​

  • Create a SIP trunk in the Telekom BSP Portal
  • Assign phone numbers
  • Set up the trunk in the PBX using the Deutsche Telekom Company Flex template
  • Check the dial plan and inbound routing

After successful setup, the trunk is immediately ready for use.